Micronization of Gefitinib Using Solution‐Enhanced Dispersion by Supercritical CO2

The antineoplastic gefitinib has a low aqueous solubility, leading to poor absorption rates. To overcome this problem, microparticles (MP) were prepared using solution‐enhanced dispersion by supercritical fluids (SEDS) with supercritical CO₂ and the cosolvents dichloromethane and ethanol. The results showed that the use of SEDS resulted in the formation of smaller particles and rendered the usually heterogeneous crystals of the crude drug pure and uniform. Furthermore, the reduction in the MP size increased the dissolution rate of gefitinib, and in vitro cytotoxicity assays indicated that the MP inhibited the proliferation of A549 cells to a larger extent than did the crude drug. Given the beneficial properties of the MP, SEDS could potentially be used to micronize drugs for therapeutic applications.     

SBP-SAT方法及其在波动领域的应用

基于分部求和(Summation By Parts)方法和同时逼近项(Simultaneous Approximation Terms)技术建立的有限差分方法,具有更高的精度和稳定性。同时在介质几何不连续、参数突变条件具有较大的优势。国内对SBP-SAT方法的相关研究目前较少,论文对该方法的研究背景,方法发展过程进行了介绍并基于SBP-SAT方法和弹性波动理论,结合初边值条件,推导出曲线网格条件下的弹性波动SBP-SAT离散方程。最后,通过数值模拟实现地震波传播过程,介绍该方法在地震数值模拟领域中的应用价值和前景。     

铝热还原制备高钛铁脱氧性能的研究

炉外铝热反应制备的高钛铁合金由于Al、O含量高，不能直接用于钢水精炼过程。本文研究了高铝高钛铁在钢液精炼过程中的热力学，以及高钛铁中铝和铁含量对钢液精炼过程的影响。结果表明：采用Ti和Al作为复合脱氧剂，在1873K当钢水中的aTi/aAl大于8时，脱氧产物为Ti2O3；但事实上，只有当液态钢中的aTi/aAl值高于10时，Ti2O3才会作为脱氧产物沉淀。采用高铝高钛铁作为脱氧剂，钢水中铝和钛的含量可以满足相关钢的成分要求。随着高钛铁含量的增加，精炼后的铸钢中夹杂物由硅酸盐转变为Ti-Al-Mn复合夹杂物；同时，在这些夹杂物周围形成径向针状铁素体，细化了钢的微观结构。实际系统中的aTi/aAl值为17.78（> 8），与理论结果一致。当钢液中的氧含量高时，控制钢水中aTi/aAl的值是至关重要的。     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

渤海湾盆地沙垒田地区新近纪走滑断裂发育特征及其对油气富集的控制作用

沙垒田凸起地区是渤海海域西部新近系油气最为富集的区域，为了明确新近系走滑断裂发育特征及对油气富集的控制作用，依托连片高精度三维地震、钻井取心等资料，对走滑断裂类型及发育特征进行了详细刻画，并对走滑断裂与成藏要素之间的关系进行了探讨。综合研究表明：研究区发育断穿基底走滑断裂、盖层走滑断裂及伸展-走滑断裂三种不同类型走滑断裂；走滑断裂对圈闭的控制作用表现为在不同类型走滑断裂控制下，断裂带内及断裂带间形成了多种类型圈闭，其中大型披覆背斜圈闭、断鼻、断背斜圈闭为有利圈闭，小型断块圈闭为不利圈闭；走滑断裂对输导体系的控制作用体现在断裂活动控制了骨架砂体输导体系及断裂输导体系的形成发育，有利于周边凹陷成熟烃源岩排烃及运移输导；走滑断裂对储层的控制作用表现为走滑作用形成的高角度裂缝提高了储层渗透率，改善了储层物性。新近纪普遍发育的走滑断裂是研究区油气富集的主控因素。     

非平稳条件下基于贝叶斯网络的内涝风险评估和管理方法

受非平稳条件因素(如气候变化、城市化)的影响,近几年内涝灾害频发。以Z市某地块为研究区域,借助地理信息系统(ArcGIS)和暴雨雨洪管理模型(SWMM)实现研究区排水管网的水动力模拟。在不同降雨情境下,比较分析现状系统及不同改造方案下的系统溢流量等信息,计算内涝风险指数。采用贝叶斯网络分析工具(Bayes Server)对引发内涝风险的主要因素进行推理、识别和分析,进而构建内涝风险评估模型。该模型便于决策者根据设计需求,结合各因素的不确定性范围和发生概率值,综合选取最适合的改造措施,优化市政排水防涝规划,为市政基础设施建设提供了依据。     

Logarithmic decrease of adhesion force with lateral dynamic revealed by an AFM cantilever at different humidities

Adhesion forces between a tipless cantilever and an Au film were determined to investigate the influence of lateral velocity by recording force curves with an atomic force microscope at 20%–90% relative humidities. The sample was moved laterally, forth and back, with a frequency of 0.001–100 Hz and scan distances of 0.8, 8, and 80 μm to achieve a velocity ranging over 7 orders of magnitude. Experimental results show that at low lateral velocities (between 1.6 nm/s and 1–10 μm/s), the adhesion force either increases or decreases or remains stable with the lateral velocity without a certain characteristic trend. However, after a critical velocity, the adhesion force decreases logarithmically with the lateral velocity (between 1–10 and 16,000 μm/s). The decreasing magnitude can be as large as 97.3% of the maximum adhesion force. This decrease is well-explained by the contact time dependence of water bridges formed by capillary condensation.     

Improving the hydrophilicity of polyethersulfone membrane by the combination of grafting technology and reverse thermally induced phase separation method

In this work, surface grafting modification technology was combined with reverse thermally induced phase separation (RTIPS) method in order to improve the structure and permanent hydrophilicity of polyethersulfone (PES) membranes. Acrylic solution with different concentrations was grafted on the surface of PES membranes while grafting temperature and grafting time were also varied. The modified PES membranes were characterized in all aspects. Attenuated total reflectance Fourier transform-infrared confirmed successful modification of the PES membrane by grafting acrylic acid. Scanning electron microscopy revealed that homogeneous porous top surface as well as spongy-like cross-section structure appeared in the membrane by RTIPS procedure. Moreover, porosity was affected by changes of acrylic acid concentration, grafting temperature, and grafting time. Atomic force microscopy showed that grafting acrylic acid gave a reduction in roughness of PES membrane. Combined with the decreased values of contact angle, the hydrophilicity and antifouling performance of the PES membrane were improved. The pure water flux and BSA rejection rate of the grafted PES membranes were remarkably improved for pure PES membrane and attained a maximum, which was 1,646.24 L/(m²h) and 94.5%, respectively. The long-term test demonstrated that grafting membranes exhibited outstanding elevated water flux recovery ratio (>85%).